NEC NL8060BC26-17

The NEC NL8060BC26-17 is a rugged 10.4-inch a-Si TFT-LCD module engineered for industrial applications where dependable image quality, wide viewing angles, and long service life are important. It offers an 800 × 600 SVGA resolution with a 4:3 aspect ratio and an active display area of 211.2 × 158.4 mm. The module dimensions are approximately 243 × 185.1 × 11.5 mm, making it suitable for industrial HMIs, process controllers, factory automation terminals, and embedded monitoring systems.

The display uses TN, Normally White, Transmissive TFT technology with RGB vertical stripe arrangement and supports up to 262,144 colors through a 6-bit digital RGB input structure. It delivers a typical brightness of 280 cd/m² with a contrast ratio of 300:1, providing clear readability in industrial environments. The panel also includes a low-reflection anti-reflective surface and offers viewing angles of approximately 50°/50°/35°/45°.

The NL8060BC26-17 includes an edge-type dual CCFL backlight system with replaceable long-life lamps. NEC recommends using inverter model 104PWBR1 for proper operation. The module supports reversible scan direction, allowing either upper-side or lower-side viewing orientation depending on installation requirements. It uses a 41-pin 1-channel 6-bit CMOS interface with DE (Data Enable) function and supports both 3.3V and 5.0V input voltage.

The module is designed for long-term industrial use and supports operating temperatures from 0°C to 50°C with storage temperatures from -20°C to 60°C. It also includes replaceable lamp holders, face mounting holes, and 180-degree reverse mounting support, making it suitable for legacy equipment maintenance and industrial system upgrades.

Community discussions often note that larger TFT displays with RGB or CMOS interfaces typically require continuous refresh and may need dedicated controller boards or frame buffer support when integrating into custom systems.

Key Features:

• 10.4-inch industrial TFT-LCD display
• 800 × 600 SVGA resolution
• TN, Normally White, Transmissive display mode
• 262,144 color support
• 280 cd/m² brightness
• 300:1 contrast ratio
• Viewing angles: 50° / 50° / 35° / 45°
• Anti-reflective low-reflection surface
• Dual CCFL edge-type backlight
• Replaceable lamp holder design
• 41-pin 1-channel 6-bit CMOS interface
• DE (Data Enable) function support
• Reversible scan direction
• 3.3V / 5.0V operating voltage
• Active area: 211.2 × 158.4 mm
• Module size: 243 × 185.1 × 11.5 mm
• Operating temperature: 0°C to 50°C
• Storage temperature: -20°C to 60°C
• Suitable for factory automation systems, process controllers, industrial monitors, medical equipment, and embedded control terminals